Linux version 2.6.20.1 (greg@vdr) (gcc version 4.1.2 (Gentoo 4.1.2)) #1 SMP PREEMPT Fri Mar 2 09:22:13 CET 2007 Command line: root=/dev/md3 vga=0x507 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data) BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 524176) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fb020 ACPI: XSDT (v001 ÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿ 0x01000730 MSFT 0x00000097) @ 0x000000007ff90100 ACPI: FADT (v003 MSTEST OEMFACP 0x01000730 MSFT 0x00000097) @ 0x000000007ff90290 ACPI: MADT (v001 MSTEST OEMAPIC 0x01000730 MSFT 0x00000097) @ 0x000000007ff90390 ACPI: MCFG (v001 MSTEST OEMMCFG 0x01000730 MSFT 0x00000097) @ 0x000000007ff90400 ACPI: SLIC (v001 ÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿ 0x01000730 MSFT 0x00000097) @ 0x000000007ff90440 ACPI: OEMB (v001 MSTEST AMI_OEM 0x01000730 MSFT 0x00000097) @ 0x000000007ff9e040 ACPI: HPET (v001 MSTEST OEMHPET 0x01000730 MSFT 0x00000097) @ 0x000000007ff99c40 ACPI: DSDT (v001 A0693 A0693000 0x00000000 INTL 0x20060113) @ 0x0000000000000000 Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 524176) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524176 On node 0 totalpages: 524079 DMA zone: 56 pages used for memmap DMA zone: 1154 pages reserved DMA zone: 2789 pages, LIFO batch:0 DMA32 zone: 7110 pages used for memmap DMA32 zone: 512970 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a202 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e4000 Nosave address range: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) PERCPU: Allocating 32256 bytes of per cpu data Built 1 zonelists. Total pages: 515759 Kernel command line: root=/dev/md3 vga=0x507 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2059636k/2096704k available (3034k kernel code, 36524k reserved, 1009k data, 224k init) Calibrating delay using timer specific routine.. 4805.45 BogoMIPS (lpj=8005521) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L3 cache: 4096K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) Freeing SMP alternatives: 28k freed ACPI: Core revision 20060707 activating NMI Watchdog ... done. Using local APIC timer interrupts. result 16666633 Detected 16.666 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4801.07 BogoMIPS (lpj=8000112) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L3 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Brought up 2 CPUs testing NMI watchdog ... OK. time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 2399.998 MHz processor. migration_cost=17 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: cfc00000-d3cfffff PREFETCH window: 8fa00000-cf9fffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: cfa00000-cfafffff PCI: Bridge: 0000:00:1c.5 IO window: b000-bfff MEM window: d3d00000-d3dfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: c000-cfff MEM window: d3e00000-dfefffff PREFETCH window: 88000000-880fffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered SGI XFS with large block/inode numbers, no debug enabled io scheduler noop registered io scheduler cfq registered (default) vesafb: framebuffer at 0xa0000000, mapped to 0xffffc20000080000, using 2560k, total 524288k vesafb: mode is 1280x1024x8, linelength=1280, pages=1 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707] Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 19 (level, low) -> IRQ 19 skge 1.9 addr 0xdfef4000 irq 19 chip Yukon-Lite rev 9 skge eth0: addr 00:1a:92:4b:02:5a ata_piix 0000:00:1f.2: version 2.00ac7 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFF90 irq 14 ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFF98 irq 15 scsi0 : ata_piix ata1.00: ATA-7, max UDMA7, 781422768 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.01: ATAPI, max UDMA/100 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/100 scsi1 : ata_piix ata2.00: ATA-7, max UDMA7, 781422768 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5 SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: CD-ROM LITE-ON DVDRW SH-16A7S WS04 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 sr 0:0:1:0: Attached scsi generic sg1 type 5 scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5 SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > sd 1:0:0:0: Attached scsi disk sdb sd 1:0:0:0: Attached scsi generic sg2 type 0 ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ata3: SATA max UDMA/133 cmd 0xE080 ctl 0xE002 bmdma 0xD800 irq 19 ata4: SATA max UDMA/133 cmd 0xDC00 ctl 0xD882 bmdma 0xD808 irq 19 scsi2 : ata_piix ATA: abnormal status 0x7F on port 0xE087 scsi3 : ata_piix ATA: abnormal status 0x7F on port 0xDC07 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdffffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdffff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e880 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ec00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-3: new high speed USB device using ehci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 2-3: configuration #1 chosen from 1 choice hub 2-3:1.0: USB hub found hub 2-3:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 2-3.1: new high speed USB device using ehci_hcd and address 4 usb 2-3.1: configuration #1 chosen from 1 choice hub 2-3.1:1.0: USB hub found hub 2-3.1:1.0: 4 ports detected usb 2-3.2: new high speed USB device using ehci_hcd and address 5 usb 2-3.2: configuration #1 chosen from 1 choice usb 7-1: new full speed USB device using uhci_hcd and address 2 usb 7-1: configuration #1 chosen from 1 choice hub 7-1:1.0: USB hub found hub 7-1:1.0: 4 ports detected usb 7-1.1: new low speed USB device using uhci_hcd and address 3 usb 7-1.1: configuration #1 chosen from 1 choice usb 7-1.4: new full speed USB device using uhci_hcd and address 4 usb 7-1.4: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech Logitech Gaming Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [Logitech Logitech Gaming Keyboard] on usb-0000:00:1d.2-1.1 input: Logitech Logitech Gaming Keyboard as /class/input/input1 input,hiddev96: USB HID v1.10 Device [Logitech Logitech Gaming Keyboard] on usb-0000:00:1d.2-1.1 input: G15 Keyboard G15 Keyboard as /class/input/input2 input,hiddev97: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:1d.2-1.4 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). ALSA device list: No soundcards found. TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) logips2pp: Detected unknown logitech mouse model 105 input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3 md: Autodetecting RAID arrays. md: autorun ... md: considering sdb6 ... md: adding sdb6 ... md: sdb5 has different UUID to sdb6 md: sdb2 has different UUID to sdb6 md: adding sda6 ... md: sda5 has different UUID to sdb6 md: sda2 has different UUID to sdb6 md: created md4 md: bind md: bind md: running: md4: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sdb6 raid0: comparing sdb6(360329792) with sdb6(360329792) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sda6 raid0: comparing sda6(360329792) with sdb6(360329792) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 720659584 blocks. raid0 : conf->hash_spacing is 720659584 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: considering sdb5 ... md: adding sdb5 ... md: sdb2 has different UUID to sdb5 md: adding sda5 ... md: sda2 has different UUID to sdb5 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering sdb2 ... md: adding sdb2 ... md: adding sda2 ... md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 224k freed ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v1.10 addr 0xd3dfc000 irq 17 Yukon-EC Ultra (0xb4) rev 2 sky2 eth1: addr 00:1a:92:4b:0d:62 PCI: Enabling device 0000:00:1f.3 (0001 -> 0003) ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18 nvidia: module license 'NVIDIA' taints kernel. saa7146: register extension 'budget_ci dvb'. ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 22 saa7146: found saa7146 @ mem ffffc20000036c00 (revision 1, irq 22) (0x13c2,0x100f). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI). Linux video capture interface: v2.00 cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded cx2388x alsa driver version 0.0.6 loaded cx2388x v4l2 driver version 0.0.6 loaded adapter has MAC addr = 00:d0:5c:23:a3:9b input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input4 DVB: registering frontend 0 (ST STV0299 DVB-S)... cx88[0]: Your board isn't known (yet) to the driver. You can cx88[0]: try to pick one of the existing card configs via cx88[0]: card= insmod option. Updating to the latest cx88[0]: version might help as well. cx88[0]: Here is a list of valid choices for the card= insmod option: cx88[0]: card=0 -> UNKNOWN/GENERIC cx88[0]: card=1 -> Hauppauge WinTV 34xxx models cx88[0]: card=2 -> GDI Black Gold cx88[0]: card=3 -> PixelView cx88[0]: card=4 -> ATI TV Wonder Pro cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert cx88[0]: card=6 -> AverTV Studio 303 (M126) cx88[0]: card=7 -> MSI TV-@nywhere Master cx88[0]: card=8 -> Leadtek Winfast DV2000 cx88[0]: card=9 -> Leadtek PVR 2000 cx88[0]: card=10 -> IODATA GV-VCP3/PCI cx88[0]: card=11 -> Prolink PlayTV PVR cx88[0]: card=12 -> ASUS PVR-416 cx88[0]: card=13 -> MSI TV-@nywhere cx88[0]: card=14 -> KWorld/VStream XPert DVB-T cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1 cx88[0]: card=16 -> KWorld LTV883RF cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q cx88[0]: card=18 -> Hauppauge Nova-T DVB-T cx88[0]: card=19 -> Conexant DVB-T reference design cx88[0]: card=20 -> Provideo PV259 cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus cx88[0]: card=22 -> pcHDTV HD3000 HDTV cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC) cx88[0]: card=26 -> IODATA GV/BCTV7E cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo) cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550 cx88[0]: card=33 -> Kworld V-Stream Xpert DVD cx88[0]: card=34 -> ATI HDTV Wonder cx88[0]: card=35 -> WinFast DTV1000-T cx88[0]: card=36 -> AVerTV 303 (M126) cx88[0]: card=37 -> Hauppauge Nova-S-Plus DVB-S cx88[0]: card=38 -> Hauppauge Nova-SE2 DVB-S cx88[0]: card=39 -> KWorld DVB-S 100 cx88[0]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid cx88[0]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro cx88[0]: card=43 -> KWorld/VStream XPert DVB-T with cx22702 cx88[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital cx88[0]: card=45 -> KWorld HardwareMpegTV XPert cx88[0]: card=46 -> DViCO FusionHDTV DVB-T Hybrid cx88[0]: card=47 -> pcHDTV HD5500 HDTV cx88[0]: card=48 -> Kworld MCE 200 Deluxe cx88[0]: card=49 -> PixelView PlayTV P7000 cx88[0]: card=50 -> NPG Tech Real TV FM Top 10 cx88[0]: card=51 -> WinFast DTV2000 H cx88[0]: card=52 -> Geniatech DVB-S cx88[0]: card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T cx88[0]: card=54 -> Norwood Micro TV Tuner cx88[0]: card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM cx88[0]: card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder CORE cx88[0]: subsystem: 0070:6902, board: UNKNOWN/GENERIC [card=0,autodetected] TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe cx88[0]/2: cx2388x 8802 Driver Manager CORE cx88[0]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt 0000:04:05.2[A] -> GSI 20 (level, low) -> IRQ 20 cx88[0]/2: found at 0000:04:05.2, rev: 3, irq: 20, latency: 64, mmio: 0xda000000 ACPI: PCI Interrupt 0000:04:02.1[A] -> GSI 23 (level, low) -> IRQ 23 cx88[1]: Your board isn't known (yet) to the driver. You can cx88[1]: try to pick one of the existing card configs via cx88[1]: card= insmod option. Updating to the latest cx88[1]: version might help as well. cx88[1]: Here is a list of valid choices for the card= insmod option: cx88[1]: card=0 -> UNKNOWN/GENERIC cx88[1]: card=1 -> Hauppauge WinTV 34xxx models cx88[1]: card=2 -> GDI Black Gold cx88[1]: card=3 -> PixelView cx88[1]: card=4 -> ATI TV Wonder Pro cx88[1]: card=5 -> Leadtek Winfast 2000XP Expert cx88[1]: card=6 -> AverTV Studio 303 (M126) cx88[1]: card=7 -> MSI TV-@nywhere Master cx88[1]: card=8 -> Leadtek Winfast DV2000 cx88[1]: card=9 -> Leadtek PVR 2000 cx88[1]: card=10 -> IODATA GV-VCP3/PCI cx88[1]: card=11 -> Prolink PlayTV PVR cx88[1]: card=12 -> ASUS PVR-416 cx88[1]: card=13 -> MSI TV-@nywhere cx88[1]: card=14 -> KWorld/VStream XPert DVB-T cx88[1]: card=15 -> DViCO FusionHDTV DVB-T1 cx88[1]: card=16 -> KWorld LTV883RF cx88[1]: card=17 -> DViCO FusionHDTV 3 Gold-Q cx88[1]: card=18 -> Hauppauge Nova-T DVB-T cx88[1]: card=19 -> Conexant DVB-T reference design cx88[1]: card=20 -> Provideo PV259 cx88[1]: card=21 -> DViCO FusionHDTV DVB-T Plus cx88[1]: card=22 -> pcHDTV HD3000 HDTV cx88[1]: card=23 -> digitalnow DNTV Live! DVB-T cx88[1]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models cx88[1]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC) cx88[1]: card=26 -> IODATA GV/BCTV7E cx88[1]: card=27 -> PixelView PlayTV Ultra Pro (Stereo) cx88[1]: card=28 -> DViCO FusionHDTV 3 Gold-T cx88[1]: card=29 -> ADS Tech Instant TV DVB-T PCI cx88[1]: card=30 -> TerraTec Cinergy 1400 DVB-T cx88[1]: card=31 -> DViCO FusionHDTV 5 Gold cx88[1]: card=32 -> AverMedia UltraTV Media Center PCI 550 cx88[1]: card=33 -> Kworld V-Stream Xpert DVD cx88[1]: card=34 -> ATI HDTV Wonder cx88[1]: card=35 -> WinFast DTV1000-T cx88[1]: card=36 -> AVerTV 303 (M126) cx88[1]: card=37 -> Hauppauge Nova-S-Plus DVB-S cx88[1]: card=38 -> Hauppauge Nova-SE2 DVB-S cx88[1]: card=39 -> KWorld DVB-S 100 cx88[1]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid cx88[1]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) cx88[1]: card=42 -> digitalnow DNTV Live! DVB-T Pro cx88[1]: card=43 -> KWorld/VStream XPert DVB-T with cx22702 cx88[1]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital cx88[1]: card=45 -> KWorld HardwareMpegTV XPert cx88[1]: card=46 -> DViCO FusionHDTV DVB-T Hybrid cx88[1]: card=47 -> pcHDTV HD5500 HDTV cx88[1]: card=48 -> Kworld MCE 200 Deluxe cx88[1]: card=49 -> PixelView PlayTV P7000 cx88[1]: card=50 -> NPG Tech Real TV FM Top 10 cx88[1]: card=51 -> WinFast DTV2000 H cx88[1]: card=52 -> Geniatech DVB-S cx88[1]: card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T cx88[1]: card=54 -> Norwood Micro TV Tuner cx88[1]: card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM cx88[1]: card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder CORE cx88[1]: subsystem: 0070:6902, board: UNKNOWN/GENERIC [card=0,autodetected] TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe cx2388x dvb driver version 0.0.6 loaded cx8802_register_driver() ->registering driver type=dvb access=shared CORE cx88[0]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52] cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 1 (Conexant CX24123/CX24109)... cx88[1]/1: CX88x/0: ALSA support for cx2388x boards ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9746 Fri Dec 15 10:19:35 PST 2006 ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 23 (level, low) -> IRQ 23 cx88[1]/0: found at 0000:04:02.0, rev: 5, irq: 23, latency: 64, mmio: 0xdb000000 cx88[1]/0: registered device video0 [v4l2] cx88[1]/0: registered device vbi0 ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 20 (level, low) -> IRQ 20 cx88[0]/0: found at 0000:04:05.0, rev: 3, irq: 20, latency: 64, mmio: 0xd9000000 cx88[0]/0: registered device video1 [v4l2] cx88[0]/0: registered device vbi1 ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 21 (level, low) -> IRQ 21 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[dfeff000-dfeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] EXT3 FS on md3, internal journal ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001205f74] kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-10, internal journal EXT3-fs: mounted filesystem with ordered data mode. Filesystem "dm-7": Disabling barriers, not supported by the underlying device XFS mounting filesystem dm-7 Ending clean XFS mount for filesystem: dm-7 Adding 1004052k swap on /dev/sda3. Priority:1 extents:1 across:1004052k Adding 1004052k swap on /dev/sdb3. Priority:1 extents:1 across:1004052k usb-storage: device scan complete scsi 4:0:0:0: Direct-Access SMSC 223 U HS-CF 3.60 PQ: 0 ANSI: 0 scsi 4:0:0:1: Direct-Access SMSC 223 U HS-MS 3.60 PQ: 0 ANSI: 0 scsi 4:0:0:2: Direct-Access SMSC 223 U HS-SM 3.60 PQ: 0 ANSI: 0 scsi 4:0:0:3: Direct-Access SMSC 223 U HS-SD/MMC 3.60 PQ: 0 ANSI: 0 sd 4:0:0:0: Attached scsi removable disk sdc sd 4:0:0:0: Attached scsi generic sg3 type 0 sd 4:0:0:1: Attached scsi removable disk sdd sd 4:0:0:1: Attached scsi generic sg4 type 0 sd 4:0:0:2: Attached scsi removable disk sde sd 4:0:0:2: Attached scsi generic sg5 type 0 sd 4:0:0:3: Attached scsi removable disk sdf sd 4:0:0:3: Attached scsi generic sg6 type 0 sky2 eth1: enabling interface sky2 eth1: ram buffer 0K skge eth0: enabling interface skge eth0: Link is up at 100 Mbps, full duplex, flow control both cdrom: This disc doesn't have any tracks I recognize! **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] forgot to specify physical device; fix it! **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0] forgot to specify physical device; fix it! **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0] forgot to specify physical device; fix it! cx88[0]/2-mpeg: cx8802_timeout cx88[0]/2-mpeg: cx8802_timeout cx88[0]/2-mpeg: cx8802_timeout cx88[0]/2-mpeg: cx8802_timeout cx88[0]/2-mpeg: cx8802_timeout